- The main application of super absorbent polymer
- Correct selection method of polyacrylamide for mineral processing
- What is the degree of hydrolysis and ionic degree of polyacrylamide?
- What factors are related to the amount of polyacrylamide?
- Effect and distinction of polyacrylamide and decolorizing agent
- Causes and solutions of sludge whitening in sewage
- Application of polyacrylamide in the whole process of oil recovery
- Characteristics and application range of instant polyacrylamide
- Spray drying polyaluminum chloride -- Chinafloc-PAC
- Sludge dewatering process of polyacrylamide
As adhesive, fragrance special polypropylene acyl article applies to the sweet, grass incense, incense coil, BangXiang, mosquito-repellent incense, bamboo stick incense incense. The following is a kind of incense. Materials: including aggregate, bond, spices, etc. The body of the aggregate of incense, mainly wood powder, requires no peculiar smell; Fineness, generally around 100 mesh, no other special requirements. Also useful to other plant powder, such as various kinds of crops straw, grass meal, etc., or a combination of them. The traditional bond is elm bark powder, now mostly use incense use polypropylene acyl. Spices can be a variety of natural spices, sandalwood, aloes, etc. Can also have a variety of spices in traditional Chinese medicine, such as anise, fennel, etc. Most people also use essence. Add pigment, make people like the color. Will mix good by the pressurized by the hole in the extrusion die, is the main process system of incense.
Will mix good by the pressurized by the hole in the extrusion die, is the main process system of incense. Extrusion of sweet article on xiang luo, after finishing the drying or drying, or type, was finished, the factory after packaging.
PAM is short for polyacrylamide, polyacrylamide is a water- soluble high polymer and widely used in petroleum, paper making, metallurgical, textile, chemical and environment protection firlds.There are three categories of anionic, cationic and non-ionic type. Different application need different grade of polyacrylamide.
Application introduction of polyacrylamide:
1.For flocculation, PAM can be used for recovering solid substance treating industrial effluent, domestic sewage and purifying water, assisting filtering, treatment oc coal, mining, and well drilling slurry material and etc.
2.For viscosity thicker, PAM can be used for oil/gas drilling additives and water injection process in EOR(Enhanced Oil Recover).
3.For paper mills, polyacrylamide can be used for enhance staying rate of filling material, speed size filterability and white water sedimentation in the paper and then coagulate to increase the strength of paper.
4.PAM can also be used in textile industries.
|Product||Apperance||Molecular Weight||Ionic Charge|
|Anionic Polyacrylamide||Powder||5-22 Million||5%-40%|
|Cationic Polyacrylamide||Powder||5-12 Million||5%-60%|
|Non-ionic Polyacrylamide||Powder||5-15 Million||0%-5%|