Magnafloc 351 is replaced by anionic flocculant Chinafloc N0510

Description

Magnafloc 351 is a high molecular weight nonionic polyacrylamide flocculant supplied as a free flowing granular powder.

Principal uses

Magnafloc 351 has found application in a variety of mineral processing operations including the following:

1. Acid leach CCD (uranium)

2. Acid leach (copper)

3. Sedimentation of jarosite precipitate in electrolytic zinc processes

4. Clarification of zinc electrolyte

5. Flocculation of copper tailings

6. China clay flocculation

7. Base metal sulphide and oxide concentrates thickening and filtration

8. Carbonate leach CCD (uranium)

9. Potash slimes clarification and dewatering

10. Phosphoric acid clarification

11. Iron ore tailings clarification

12. Pregnant liquor clarification (gold)

Dosage depends upon the application but normally lies in the range 2 – 100 g/tonne of dry substrate flocculated.

Typical properties

Physical form    White to off-white free flowing powder

Particle size     98 % < 1000 μm

Bulk density     Approx. 0.8 g/cm3

pH of 1 % solution at 25 °C   Approx. 7.0

Viscosity at 25 °C   See graph and table

Application

Recommended solution concentrations:

Stock solution 0.25 – 0.5 % max.

Feed solution 0.025 – 0.1 % max

Storage & Shelf life

Magnafloc 611 is at least stable for four years from date of manufacture in its unopened original packaging stored in a cool and dry place.

Stock solution 1 – 2 days

Details on preparation and application can be obtained from a BASF representative.

Shipping & Handling

Magnafloc 611 is available in 25 kg bags and big bags.

Corrosivity towards most standard materials of construction is low, but aluminium and galvanised equipment should be avoided.

Technical service

Advice and assistance in the running of laboratory and plant tests to select the correct product and determine the best application can be provided by representatives of BASF, who are experienced in mineral processing applications.

Health & Safety

Please refer to the Safety Data Sheet for detailed information concerning product’s hazards and appropriate protective measures in the workplace.

Chinafloc N0510 is a kind of anionic flocculant with high molecular weight and very lower hydrolysis degree which mainly used for mineral processing.as our experience ,it can replace of Magnafloc 351 totally in mineral processingwith cost performance.

Description

Magnafloc 351 is a high molecular weight nonionic polyacrylamide flocculant supplied as a free flowing granular powder.

Principal uses

Magnafloc 351 has found application in a variety of mineral processing operations including the following:

1. Acid leach CCD (uranium)

2. Acid leach (copper)

3. Sedimentation of jarosite precipitate in electrolytic zinc processes

4. Clarification of zinc electrolyte

5. Flocculation of copper tailings

6. China clay flocculation

7. Base metal sulphide and oxide concentrates thickening and filtration

8. Carbonate leach CCD (uranium)

9. Potash slimes clarification and dewatering

10. Phosphoric acid clarification

11. Iron ore tailings clarification

12. Pregnant liquor clarification (gold)

Dosage depends upon the application but normally lies in the range 2 – 100 g/tonne of dry substrate flocculated.

Typical properties

Physical form    White to off-white free flowing powder

Particle size     98 % < 1000 μm

Bulk density     Approx. 0.8 g/cm3

pH of 1 % solution at 25 °C   Approx. 7.0

Viscosity at 25 °C   See graph and table

Application

Recommended solution concentrations:

Stock solution 0.25 – 0.5 % max.

Feed solution 0.025 – 0.1 % max

Storage & Shelf life

Magnafloc 611 is at least stable for four years from date of manufacture in its unopened original packaging stored in a cool and dry place.

Stock solution 1 – 2 days

Details on preparation and application can be obtained from a BASF representative.

Shipping & Handling

Magnafloc 611 is available in 25 kg bags and big bags.

Corrosivity towards most standard materials of construction is low, but aluminium and galvanised equipment should be avoided.

Technical service

Advice and assistance in the running of laboratory and plant tests to select the correct product and determine the best application can be provided by representatives of BASF, who are experienced in mineral processing applications.

Health & Safety

Please refer to the Safety Data Sheet for detailed information concerning product’s hazards and appropriate protective measures in the workplace.

Chinafloc N0510 is a kind of anionic flocculant with high molecular weight and very lower hydrolysis degree which mainly used for mineral processing.as our experience ,it can replace of Magnafloc 351 totally in mineral processingwith cost performance.

tag:Magnafloc 351,anionic flocculant,Anionic Polyacrylamide,Chinafloc N0510