Application of non-ionic polyacrylamide emulsion in water treatment

 

Product introduction

Nonionic polyacrylamide emulsion high cost performance, stable performance, the product cost are lower than those of general emulsion, better solubility, dissolve in about 10 minutes, the effect is tiny colloidal particles and suspension particles under the action of colloidal substance or electrolyte, and particle surface charge, reduce or eliminate the repulsive force between particles. The particles are bound together, and the volume keeps growing. When the particles gather, the volume reaches a certain degree (the grain strength is about 0.01cm). It separates from the water, and this is what we observe as a flocculent precipitate.

Product features

 

 

Non-ionic polyacrylamide emulsion

 

Nonionic polyacrylamide emulsion high cost performance, stable performance, the product cost are lower than those of general emulsion, better solubility, dissolve in about 10 minutes, the effect is tiny colloidal particles and suspension particles under the action of colloidal substance or electrolyte, and particle surface charge, reduce or eliminate the repulsive force between particles. The particles are bound together, and the volume keeps growing. When the particles gather, the volume reaches a certain degree (the grain strength is about 0.01cm). It separates from the water, and this is what we observe as a flocculent precipitate.

 

Product features:

In addition to the advantages of solid polyacrylamide flocculant, non-ionic polyacrylamide emulsion also has the characteristics of high charge density selectivity, fast dissolution rate, low energy consumption, convenient storage and use. Compared with traditional solid amide cationic polyacrylamide products, non-ionic polyacrylamide emulsion is suitable for a wider range of PH value, higher charge stability, better flocculation effect, less drug use and a series of advantages. It is also suitable for the construction site without large dissolving device.

 

Product efficacy:

1. Clarification and purification effect;

2. Settlement promotion;

3. Promoting effect of filtration;

4, thickening and other effects.

 

Usage:

1. Shake the product as well as possible before using it;

2. When dissolving, add the product while adding water. The solution concentration is recommended to be controlled at 1-5 ‰, and the ripening time should be 15-25 minutes.

3, avoid the use of centrifugal pump and other high shear rotor pump, the best use of screw pump, diaphragm pump and other low shear pump;

4, the dissolution operation should be carried out in the plastic, ceramic, stainless steel and other materials of the tank, the stirring speed should not be too large, without heating. When adding non-ionic polyacrylamide solution, it should be quickly mixed with the treated liquid. After the occurrence of flocculation, the stirring speed should be slowed down to facilitate the growth of flocculation and accelerate the settlement. Generally, the amount of this product required to treat 1 ton of wastewater is less than 10 grams.

 

Product Packaging:

25KG plastic drum, 200KG plastic drum.